|
|
In Raw Panel mode the controller will work as a TCP Client connecting to a server IP address on port 9923. The server receives simple action commands when buttons, encoders, faders etc are activated. In return the server sends button colors and display content. The API is documented as “UniSketch TCP Client†on our GitHub repository. In Raw Panel mode, all the logic is placed on the server, which is typically a custom written software application. |
|
|
|
Configuration for AJA HELO with 4 Menu Layers. Menu 1 provides access to Recording, Streaming and Linked Streaming/Recording. Menu 2 provides access to Streaming Profile 1-10 via shift. Menu 3 provides access to Recording Profile 1-10 via shift. Menu 4 provides access to Presets 1-9 + Factory via shift. Control via Ethernet. |
|
|
|
Configuration for AJA Ki Pro Ultra with 2 Menu layers. Home menu provides access to Play, Stop, Previous Clip, Next Clip, Record and with shift access to Time Code and Clip Name. Menu 2 provides access to Fast Rewind, Play, Fast Forward, Timecode and Jog. Configuration uses many Graphic Icons. Control via Ethernet. |
|
|
|
Configuration for control of AUX channels on the ATEM switchers. Shift key navigates the menu to access additional AUX sources/channels. |
|
|
|
Configuration for ATEM switchers. Traditional Preview/Program selection with CUT/AUTO action (on the lower and upper edge of the button). Shift key navigates the menu to access additional Preview/Program sources and Macro selection. |
|
|
|
Changing input sources and freeze status on Barco Image Pro |
|
|
|
A example sketch utilising the "UniSketch Raw Panel" Device Core by using sytem action such as "UniSketch Raw Panel: Flag". To be used in combination with the ETH-GPI Link "2x8 GPIO TCP Server" + "2x8 GPIO UniSketch TCP Client" configurations to link three SKAARHOJ controllers together. See Tutorials on the Support/Manual page for instructions. |
|
|
|
A example sketch utilising the "UniSketch Raw Panel" Device Core by using sytem action such as "UniSketch Raw Panel: Flag". To be used in combination with multiple controllers, controlling the same ETH-GPI Link with the configuration "2x8 GPIO TCP Server". Each controller have feedback from the ETH-GPI Link if a GPI is set or not. See Tutorials on the Support/Manual page for instructions. |
|
|
|
A example sketch utilising the "TCP Server" Device Core by using sytem action such as "System: Flag" with Feedback Flag settings as well. To be used in combination with one or multiple "2x8 GPIO UniSketch TCP Client" configurations on the ETH-GPI Links. Quick Bar controls GPI Outs on the ETH-GPI Links. See Tutorials on the Support/Manual page for instructions. |
|
|
|
Configuration for Roland VP-42H. The far right button acts as a menu selector + shift selector. 3 Menu layers are available: Scenes, Layers and Layer Input selection. Control via Ethernet. |
|
|
|
Configuration for Roland XS-42H. The far right button acts as a menu selector + shift selector. 4 Menu layers are available: Scenes, Output 1 Selection, Output 2 Selection and Transition Time. Control via Ethernet. |
|
|
|
Configuration for Blackmagic VideoHub Routers. Works by selecting a Input to be routed in the "Inputs Menu" (upper edge of Menu button). In the "Outputs" menu (lower edge of Menu button) you select one or more outputs to have the selected input. By pressing the green button the routing is done. Left and right on the menu give you access to additional pages. |
|
|
|
Configuration for Blackmagic VideoHub Routers. Works by selecting one or more Outputs in the "Outputs Menu" (lower edge of Menu button). In the "Inputs Menu" (upper edge of Menu button) the input to be routed to the selected Output(s) is chosen. Left and right on the menu give you access to additional pages. |
|
|
|
Special Raw Panel configuration to work best with the SKAARHOJ Blue Pill. |
|