The following default configurations are available for your controller:

Configuration	Description	Installed Devices
ATEM + Lumens VC-A50P	Combined Configuration for ATEM and Lumens VC-A50P. The selector row sets and reflects the chosen Lumens camera and Preview/Program source from the ATEM so you know which source is on air. A press on the lower edge on the AUTO/CUT buttons does a CUT. A press on the upper edge activates a auto transition. A press on the upper edge of the SHIFT key cycles between PTZ adjustments settings for the two encoders. A press on the lower edge toggles the selector row between camera/source selected and PTZ Presets.
vMix + PTZOptics PTx	Combined Configuration for vMix and PTZOptics. The selector row sets and reflects the chosen PTZOptics camera and Preview/Active source from vMix so you know which source is on air. A press on the lower edge on the AUTO/CUT buttons does a CUT. A press on the upper edge activates a auto transition. A press on the upper edge of the SHIFT key cycles between PTZ adjustments settings for the two encoders. A press on the lower edge toggles the selector row between camera/source selected and PTZ Presets.
ATEM + Panasonic	Combined Configuration for ATEM and Panasonic PTZ cameras. The selector row sets and reflects the chosen Panasonic camera and Preview/Program source from the ATEM so you know which source is on air. A press on the lower edge on the AUTO/CUT buttons does a CUT. A press on the upper edge activates a auto transition. A press on the upper edge of the SHIFT key cycles between PTZ adjustments settings for the two encoders. A press on the lower edge toggles the selector row between camera/source selected and PTZ Presets.
NewTek NDI-HX-PTZ1 + ATEM Active	Combined Configuration for ATEM and NewTek NDI-HX-PTZ1. The selector row sets and reflects the chosen NewTek camera and Preview/Program source from the ATEM so you know which source is on air. A press on the lower edge on the AUTO/CUT buttons does a CUT. A press on the upper edge activates a auto transition. A press on the upper edge of the SHIFT key cycles between PTZ adjustments settings for the two encoders. A press on the lower edge toggles the selector row between camera/source selected and PTZ Presets.
ATEM + Ross Pivotcam	Combined Configuration for ATEM and Ross Pivotcam The selector row sets and reflects the chosen Ross camera and Preview/Program source from the ATEM so you know which source is on air. A press on the lower edge on the AUTO/CUT buttons does a CUT. A press on the upper edge activates a auto transition. A press on the upper edge of the SHIFT key cycles between PTZ adjustments settings for the two encoders. A press on the lower edge toggles the selector row between camera/source selected and PTZ Presets.
Raw Panel	In Raw Panel mode the controller will work as a TCP Client connecting to a server IP address on port 9923. The server receives simple action commands when buttons, encoders, faders etc are activated. In return the server sends button colors and display content. The API is documented as “UniSketch TCP Client” on our GitHub repository. In Raw Panel mode, all the logic is placed on the server, which is typically a custom written software application.
CANON CR-N300/N500	Made with shift layers
Blue Pill Mode	Special Raw Panel configuration to work best with the SKAARHOJ Blue Pill.

---

Network configuration

DHCP   Static

IP

Subnet

Gateway

DNS

Devices

Enabled	Name	IP
	BMD ATEM
	NewTek NDIHX-PTZ1