The following default configurations are available for your controller:

Configuration	Description	Installed Devices
XC8-Raw Panel	In Raw Panel mode the controller will work as a TCP Client connecting to a server IP address on port 9923. The server receives simple action commands when buttons, encoders, faders etc are activated. In return the server sends button colors and display content. The API is documented as “UniSketch TCP Client” on our GitHub repository. In Raw Panel mode, all the logic is placed on the server, which is typically a custom written software application.
AJA Ki Pro Ultra	Configuration for AJA Ki Pro Ultra. Jog/shuttle wheel provides coarse movement and fine-tune control for frame by frame movement. The maximum speed for Shuttle can be set on the configuration page. T-bar controls playback speed. The display shows Clip name and Time Code. 4 of the 5 buttons below the displays are set to Previous Clip, Next Clip, Pay and Stop. With shift enabled these are transformed to Fast Rewind, Fast Forward, Record and Stop. Control via Ethernet.
Dreamchip SSM500 Replay Active	Replay control for the SSM500 on the XC8
vMix Replay	Configuration for vMix Replay. Jog/shuttle wheel provides coarse movement and fine-tunes control for frame by frame movement. T-bar controls playback speed with high precision. Events can be organized with the event management buttons for selecting, copying and moving events to different banks. If you prefer to set In and Out Points manually instead of specific durations use the action "vMix: Replay Set".
vMix 2.0 Replay	Configuration for vMix 2.0 Replay. Jog/shuttle wheel provides coarse movement and fine-tunes control for frame by frame movement. T-bar controls playback speed with high precision.
Blue Pill Mode	Special Raw Panel configuration to work best with the SKAARHOJ Blue Pill.

---

Network configuration

DHCP   Static

IP

Subnet

Gateway

DNS

Devices

Enabled	Name	IP
	Dream Chip ATOM One