Configuration of your Tally Box with S/N #

The following default configurations are available for your controller:

Configuration Description Installed Devices
In Raw Panel mode the controller will work as a TCP Client connecting to a server IP address on port 9923. The server receives simple action commands when buttons, encoders, faders etc are activated. In return the server sends button colors and display content. The API is documented as “UniSketch TCP Client” on our GitHub repository. In Raw Panel mode, all the logic is placed on the server, which is typically a custom written software application.
Preview & Program Tally from the ATEM Switcher on source 1 to 8.
Preview & Program Tally from the ATEM Switcher on source 1 to 8.
A example sketch utilising the "UniSketch Raw Panel" Device Core by using sytem action such as "UniSketch Raw Panel: Flag". To be used in combination with the ETH-GPI Link "2x8 GPIO TCP Server" configurations to link the controllers together. Tally 1-8 corresponds to Raw Panel Flag 8-15. See Tutorials on the Support/Manual page for instructions.
A example sketch utilizing the "TCP Server" Device Core by using system action such as "System: Flag". To be used in combination with the ETH-GPI Link "2x8 GPIO TCP Client" configurations to link the controllers together. Red Tally 1-8 corresponds to Raw Panel Flag 0-7. See Tutorials on the Support/Manual page for instructions.
Uses Flag 1-16 to set Preview and Program Tally.
Preview & Program Tally from Livestream Studio for input 1 to 8.
Preview & Program Tally from the Roland Switcher on source 1 to 8.
Preview & Program Tally from the TriCaster Mini on source 1 to 8.
Maps Address 1-8, bits 0/1 out to Red/Green tally lamps on the box. Based on v3.1 messages.
Maps Indexs 1-8 for Screen ID 0 out to Red/Green tally lamps on the box. Based on v5.0 messages.
For tally via TCP connection utilizing system flags for red/green tally. Odd number flags 1-15 trigger red tally while even number flags 2-16 trigger green.
Preview & Program Tally from vMix on input 1 to 8. Requires vMixBridge application to connect. See manual on https://www.skaarhoj.com/support/manuals/
Preview & Program Tally from vMix on input 1 to 8. Requires vMixProxy application to connect. See manual on https://www.skaarhoj.com/support/manuals/
Special Raw Panel configuration to work best with the SKAARHOJ Blue Pill.

Network configuration

  
IP
Subnet
Gateway
DNS

Devices

Enabled Name IP
vMix 2.0