|
|
AJA FS4 configuration with access to a large set of parameters including controlling the 4 different 2K/HD/SD channels with button 1-4 (or alternatively just one 4K/UltraHD channel via button 5). There is 7 state selections. The 6 first provides access to two menus each - each button is configured with an action when pressed on the upper edge + lower edge. The Preset menu only have 1 option. The SHIFT key turns the "State - Preset" selection into a Monitor Out mapping function and provides additional presets in the Presets menu. The 5 buttons above the menu selector is to turn on/off Color Corrector, ProcAmp, Legalizer, Custom Size/Position and ROI Mode works by pressing left/right edge of the buttons. Control via Ethernet. |
|
|
|
AJA FS HDR configuration with focus on Color Corrector and access to a large set of parameters including controlling the 4 different 2K/HD/SD channels with button 1-4 (or alternatively just one 4K/UltraHD channel via button 5). For some of the menus, the menu selectors works by pressing on the upper + lower edge of the buttons (two menus for each button). Additional menus are found by pushing the shift key. The 6 buttons above the menu selectors is to turn on/off Color Corrector, ProcAmp, Legalizer, Custom Size/Position and ROI Mode works by pressing left/right edge of the buttons. And it is possible to set ROI mode to Full directly. Control via Ethernet. |
|
|
|
AJA FS HDR configuration with focus on Colorfront Live and access to a large set of parameters including controlling the 4 different 2K/HD/SD channels with button 1-4 (or alternatively just one 4K/UltraHD channel via button 5). The menu selectors works by pressing on the upper + lower edge of the buttons (two menus for each button). Additional menus are found by pushing the shift key. The 6 buttons above the menu selectors is to turn on/off Colorfront engine, ProcAmp, Legalizer, Custom Size/Position and ROI Mode works by pressing left/right edge of the buttons. Control via Ethernet. |
|
|
|
Standard configuration for shading Blackmagic Design cameras through an ATEM switcher or SKAARHOJ ATEM Proxy |
|
|
|
Standard configuration for shading Blackmagic Design cameras through SDI out (requires SDI option) |
|
|
|
Standard configuration for controlling cameras via RC-V100 Protocol. (requires ETH-LANC Link) |
|
|
|
Dream Chip ATOM One configuration with full control of camera parameters via the menu and encoder knobs. Access to color parametre settings like Gain, Black, Black Master and Flare as well as white balance filters and specific ATOM One features. Control via Serial (requires Ethernet to Serial adapter, see Dream Chip manual). |
|
|
|
NewTek NDI PTZ camera HDI-HX PTZ1 configuration with full control of camera parameters via the menu and encoder knobs. Access to exposure settings like iris, shutter, gain as well as white balance and specific NewTek features. Control via Ethernet. |
|
|
|
Implements RCP control for Panasonics AU-CX350 4K Camcorder, enabling it to be used in live production environments with centralized CCU control. Features includes exposure control, White Balance settings, Menu Navigation on camera including enabling/disabling Menu output on SDI. Control up to 4 cameras. See Device Core manual for details. Control via Ethernet. |
|
|
|
Implements full RCP control for Panasonics AU-EVA1 cinematic camera, enabling it to be used in live production environments with centralized CCU control. Control up to 4 cameras. See Device Core manual for details. |
|
|
|
Standard configuration for controlling cameras via LANC. Adjust settings like iris, gain, shutter speed, white balance, zoom and focus. Some parameters can only be controlled via the "Menu" action. Notice iris control on sliders are just for cam 1-4. Cam 5-8 must be controlled via the encoder (requires ETH-LANC Link) |
|
|
|
In Raw Panel mode the controller will work as a TCP Client connecting to a server IP address on port 9923. The server receives simple action commands when buttons, encoders, faders etc are activated. In return the server sends button colors and display content. The API is documented as “UniSketch TCP Client†on our GitHub repository. In Raw Panel mode, all the logic is placed on the server, which is typically a custom written software application. |
|
|
|
|
|
|
|
|
|
|
|
Special Raw Panel configuration to work best with the SKAARHOJ Blue Pill. |
|